CIP alkaline

Highly alkaline CIP liquid detergent - non foaming formula

CIP alkaline

Highly alkaline CIP liquid detergent - non foaming formula

Information

Contains chelating agents and corrosion inhibitors. Effective in single-stage or multi-stage CIP systems.

  • It is used in a ratio of 8 to 50 ml per liter of water.
  • Appearance: Transparent.
  • Odor: Characteristic.
  • Product pH: 14.
  • Shelf life: 2 years.
  • Available in containers of 20 lt (25kg), 200 lt (290kg), and 1000 lt (1450kg)
More Information

Material Safety Data Sheets (MSDS) for the product are provided upon request.

Hazard Statement(s)

H314: Causes severe skin burns and eye damage.
H290: May be corrosive to metals.

Precautionary statements:
P102: Keep out of reach of children.
P405: Store locked up.
P234: Keep only in original container.
P280: Wear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a POISON CENTER or doctor if you feel unwell.

Application:

CIP alkaline

Cleaning of Closed Circuit CIP: Rinse the pipes with clean water and drain it into the sewer. Prepare a mixture of water with 2-4% (2-4 liters / 100 liters of water) (depending on the contamination) of the product at a temperature of 70-90°C, and let it circulate for 20 minutes. Rinse the system with clean cold water and drain it into the sewer. In an oil separator, use water below 30°C and let it circulate for 20 minutes.

Cleaning of Pasteurizer/Separator: Rinse the pipes with clean cold water. Dissolve 15-50 ml of the product per liter of water (depending on the contamination) at a temperature of 75°C, and let it circulate for 20 minutes. Rinse the system with clean cold water and drain it into the sewer. In an oil separator, use water below 30°C and let it circulate for 20 minutes.

Technical Data Sheet (TDS)